Three useful tricks when working with wood

Hello friends! Any business has its own tricks that have been developed and accumulated over the years and experience, and here I will show you three very useful tricks when working with wood in this article. Useful tips can solve many problems in everyday life. I am sure that when you recognize them, you will definitely take these methods into your arsenal and will use them all your life.

How to hammer a nail into a piece of wood so that it does not crack

If you hammer a nail into a thin piece of wood - a rail, then in most cases it will certainly crack.
To avoid this and minimize the risk of splitting, simply blunt the point of the nail with a hammer.
Now if you hammer a nail into the rail - it will not crack!
Agree, you did not know about such a trick.

How to easily screw a self-tapping screw

If you wrap long in dense wood, it can be very difficult. Self-tapping screw do not go over the face, the bat turns and so on. In general, it causes a lot of inconvenience.
This can easily be avoided by lubricating the screw with ordinary soap.
We are trying to wrap it up.
Enters like clockwork. And just as easily unscrewed.
This is especially useful when you need to wrap more than a dozen such screws.

How to slightly increase the diameter of the hole

It happens that you need to slightly increase the diameter of the hole, say under the hairpin. And then it turns out that you do not have the right drill or if you drill with a large drill, the hole will become a larger diameter than necessary.
And to precisely adjust the diameter of the hole to the stud, take a piece of sandpaper and wrap it in a tube.
The tube is the diameter of the hole.
Clamp it into the screwdriver.
And at high speeds we grind the hole.
Pulling periodically to remove chips.
Now the stud comes in as it should.
These simple tips will make your life easier and save time and money.
Friends, if you have your own tricks - write them in the comments, I think everyone will be interested to read. Bye everyone!

Watch the video: 3 Wood working Tricks Tips. (April 2024).