Share
Pin
Tweet
Send
Share
Send
To create it, we need:
- A lot of pink elastic bands and two black ones;
- The machine;
- Hook.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek.jpg)
Preparation method:
1. We dress two rubber bands on pegs.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-2.jpg)
2. Now two more pairs.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-3.jpg)
3. We dress the next pink pair of elastic bands diagonally.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-4.jpg)
4. We put on one more pair directly.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-5.jpg)
5. On the last peg we wind the elastic band three times.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-6.jpg)
6. Using the hook, pull the bottom loop.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-7.jpg)
7. Throw it to the previous column.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-8.jpg)
8. The same thing is repeated with the remaining loops.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-9.jpg)
It should work out as shown in the photo.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-10.jpg)
9. Now we begin to remove the part from the machine.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-11.jpg)
10. On the hook we put on the first and diagonal loop.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-12.jpg)
11. Such a detail turned out, you need to make the second one exactly the same, repeating all the steps from 1 to 10 points.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-13.jpg)
12. Now put on 9 pairs of rubber bands on the right side of the machine.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-14.jpg)
13. We also do it on the left side.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-15.jpg)
14. Now we put on two elastic bands diagonally, as shown in the figure.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-16.jpg)
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-17.jpg)
15. Dress seven pairs of pink rubber bands on the central pegs.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-18.jpg)
16. At the end, we string two gum diagonally.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-19.jpg)
17. We put on our two blanks with one part on the last right and left pegs, and the other part on the fifth pegs, counting from the end.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-20.jpg)
18. Gum wrap two times through the fourth row of columns.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-21.jpg)
19. We put on an elastic band on the following pegs "triangle".
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-22.jpg)
20. we also wear a few more elastic bands, as shown in the photo.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-23.jpg)
21. We put on an elastic band on the last central peg, wrap it three times.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-24.jpg)
22. From the last column we remove the lower loops and put them on three nearby pegs.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-25.jpg)
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-26.jpg)
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-27.jpg)
23. Now we remove the loops from the central row according to the same principle.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-28.jpg)
24. Also remove the diagonal loops and put on the side posts.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-29.jpg)
25. Remove the loops on the left and right sides of the machine.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-30.jpg)
26. We take the rubber band and with the help of the hook we make two loops through the first side loops (on both sides).
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-31.jpg)
It turns out, as in the picture.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-32.jpg)
27. Carefully remove the product from the machine.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-33.jpg)
28. Straighten the dress.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-34.jpg)
29. Wrap two black elastic bands around the waist.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-35.jpg)
30. We hide the upper loops with a hook, tightening them into the inside of the product.
![](http://img.uaft2404.org/img/sdela-2019/plate-iz-rezinochek-36.jpg)
Glamorous pink dress with a black belt of rubber bands is ready!
Share
Pin
Tweet
Send
Share
Send