This device is useful to everyone who equips a summer cottage or lives outside the city. And you can do it yourself with the help of available materials at hand. The universal clamp is convenient to use and can be used when carrying out a variety of works.
Manufacturing process
For this homemade product, you will need three pieces of a profile pipe of a square section 6 cm long.In two workpieces that will be parallel to each other, you need to drill one hole at a distance of 2 cm from the edge, and in the third (located perpendicular) - exactly in the middle.
Next, you need to insert long studs with nuts into the holes, after which the nuts must be welded to the surface of the profile pipes.
In addition, you need to prepare three short pieces of steel pipe that need to be welded to the ends of the studs - this is necessary so that it is convenient to twist and unscrew the studs. Instead of pipes, you can also use pieces of steel bar or square (which will be at hand).
At the final stage of work, it is necessary to weld to each other pieces of profile pipes to obtain a U-shaped structure (it is important to maintain a right angle between the workpieces). Then it remains only to screw the studs, and the device is completely ready for use.
To summarize
The universal metal clamp for the garden and the house is compact in size and practical to use, and therefore it is definitely useful in the household. The detailed manufacturing process of this home-made device, see the video on our website.
