For many owners of private houses, snow clearing in the winter sometimes causes a lot of trouble - there is so much rainfall in a day that you can wind up shoveling by hand manually while scooping up snow.
Therefore, you can make a big snow shovel. In this case, the master uses the materials at hand that were at his fingertips - a construction car with one wheel and an old trunk lid.
First of all, it is necessary to cut off the wheelbarrow trough so that only the frame with the wheel remains. To do this, you need a grinder. It will also be necessary to cut workpieces from a building corner - they are needed for subsequent work.
The process of making a snow shovel
Then, using the corners, the master welds the trunk lid of the car to the wheelbarrow frame. Another section of the corner must be welded between the handles (for greater rigidity).
At the next stage, it is necessary to cut out the square holes along the edges of the trunk lid, into which the master then inserts side jibs from the corner sections, and welds them.
The shovel is almost ready - you just have to weld a piece of a round metal pipe that is suitable for the length of the trunk lid. Now you can start cleaning snow in the yard and on the road.
You can watch more details on how to make a snow shovel with a wheel from the old trunk lid in the video on the website.
