A mess in a garage or workshop is a common thing for many. However, this must be fought, because when everything is in place, and the work goes faster. You can start small - for example, by making a wall stand from planks for storing the tool.
In this case, the master plans to use the stand for rechargeable angle grinders and battery chargers. There are also places for storing protective covers and discs.
From plywood, the master cuts out three blanks with a jigsaw, which will be used to make cells for cutting and grinding discs for the grinder. The dimensions of the stand itself are best determined by place.
The main stages of work
The stand design consists of two main elements. First you need to make the first part of the homemade product. To do this, you need to saw off three pieces of the board, and then connect them together, as shown in the photo.
Then, to one of the side walls, the master screws plywood blanks onto the screws. One cell - for cutting discs, the second can already be used for grinding and grinding wheels.
At the next stage of work, the master proceeds to manufacture the second part of the structure. This will also require boards. The mount for angle grinders is separately manufactured.
In the end, it remains only to assemble the two parts together, cover the stand with varnish or just mineral oil, and hang it on the wall. It looks very personal.
For details on how to make your own wall stand from boards for storing the tool, we recommend that you watch in the video on the site.
