Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-2.jpg)
Each one of you can make a simple and amazingly beautiful LED ceiling lamp with a beautiful pattern. To do this, you will not need as much as it usually seems, but the result will exceed all expectations. Your house will immediately take on a different look, and be filled with fabulous comfort.
Necessary materials
- Wood (bars or slats) for the frame.
- LED Strip Light:
- If you take pure white, then I recommend taking - 220V LED Strip.
- And if you take color, then take - RGB LED Strip. - Tracing paper or other film or paper. You can even take ordinary office white paper.
- Bracket used for ease of assembly.
- The stapler is furniture.
- Glue for the tree.
- Hot glue gun.
- White and paint for decoration.
The mistakes that I made at the beginning
Friends, when repeating my lamp, it is advisable to take into account my mistakes made earlier, so as not to redo the lamp several times later:
- - Do not use only wood glue, without steel brackets. The design is not strong.
- - Do not use too thin slats for the frame - the result is the same - the whole structure will be flimsy.
- - Do not stick tracing paper only in the corners, without gluing the entire perimeter.
- - Do not put tracing paper on hot glue, this is also not permissible.
Create a cover with a pattern for the lamp
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-3.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-4.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-5.jpg)
I bought a bunch of square wooden battens at a local hardware store and cut them. I did not have any specially designed design.
Tip 1: These racks in the frame can simply be installed and secured with a stapler.
Tip 2: Do not over tighten the corner clamps; this will distort the frame. Everything should be within normal limits.
Glue tracing paper
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-6.jpg)
In order to make a good and matte light, you need to use something like tracing paper or frosted glass. I recommend you choose a denser and more ductile material. Here, even white fabric may come up, but over time, it may give yellowness.
Let's make the frame of the LED lamp
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-7.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-8.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-9.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-10.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-11.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-12.jpg)
With the front, front frame with a pattern I finished. It's time to build the lamp frame itself, inside which the LED strip will be attached.
I did it all from a wide wooden battens. After construction - glue the LED strip.
We install the lamp and enjoy the result
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-13.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-14.jpg)
![](http://img.uaft2404.org/img/sdela-2019/potolochnij-svetilnik-s-uzorom-15.jpg)
How to hang a lamp, I think, it will be clear to you already. This can be done both on the brackets and on the metal corners ... It all depends on what material you have to fasten.
I really enjoy this lamp. Its smooth and relaxed glow ... He always reassures me after a hard day's work.
Original article in English
Share
Pin
Tweet
Send
Share
Send