HAIRPIN "SINEVA"

Send

An automatic hair clip is best for creating everyday hairstyles. It is easily and quickly attached to the hair, and simple, but at the same time beautiful jewelry, fixed on these hairpins, perfectly complement any image.

To make this hairpin you need:
- scissors.
- automatic hairpin.
- Satin ribbons in blue and white.
- silver rhinestones.
- glue gun.
- a middle for flowers from pastes.
- tweezers.
Create hair clips.
For the manufacture of hairpins, blanks with sides 5x5 cm from tapes of blue and white shades will be required.

Now from these details it is necessary to make petals for the central flower and leaves. To do this, the white and blue square should be given a triangular shape, folding in half each detail.

Next, you need to lay them one on top of the other, combining their sides with a fold and placing the blue blank below.

Then, holding a double part, you need to wrap the corner from one side to the middle, covering half of the white tape inside.

Then the second action should be done from the second side, giving the details a square appearance with a diagonal bend strip.

The prepared square must again be folded into a triangle along its fold line.

It remains to align the edges of the petal, cutting off curves and uneven corners and singeing the resulting slices with a flame of a lighter.

It remains to make the depth of the part, leaving 0.7 cm and cutting off the excess tape.

The result is such a detail for the central flower. In total, 10 pieces will be required.

Now you need to prepare the leaflets for decorating the flower. First you should prepare the middle for the leaves. A square of white tape must be folded in half, making two additions.

Then the edge of the triangle must be clamped with tweezers and twisted into a tight tube.

The edges of the tube should be scorched with a flame to fix the twisting. The result is a middle for the leaflet in the form of a white tube. Such parts will need 4 pieces.

It remains to create leaflets from the blue ribbon. The square blank must be folded into a triangular part, folding it in half twice.

In the center of the resulting triangle should put a tube of white tape.

The leaflet should be 2.3 cm long, the excess should be cut off, and the resulting cut thoroughly scorched by fire.

The depth of the part is 0.6 cm, the rest of the leaflet must be cut off, immediately processing opal.

It turns out a blue leaf with a white middle.

Such details need to be done in just 4 pieces. It remains to combine the leaves, connecting them in pairs, and pasting between them one petal with a rounded top.