WEED ROOTER

Send

The best method of getting rid of weeds is manual weeding. Removing plants with strong rhizomes will be a less tedious task when using a hand-made, self-made root extractor.

Device and materials. The home-made tool is based on a tubular body equipped with a cutting part in the form of a chute with sharp edges. A wooden handle is inserted from the back of the fixture, fixed with a screw through the hole in the tube.

The manual weed stubber is made from a trimming of a metal pipe with a diameter of 25-40 mm. For the workpiece, the working cylinder from the worn-out telescopic rack of the car is optimally suited - the product has thin walls made of strong steel. For the handle, use a piece of the handle or trim it from birch chocks.

Will need

Tools required:

-Bulgarian, cutting disc;
-Drill, drill;
- Files;
-Nazhdachny skin;
-Gon measuring;
-Screwdriver;
-Plane.

Weed Rooter Production Procedure

1) The steel tube is cut in length and marked according to the drawing.
2) Fasten the workpiece and grinder first make two longitudinal cuts, then remove the excess part of the metal with a transverse inclined section.
3) Cut the end of the gutter at an angle of 35 °, remove the burrs with a flat file.
4) Sharpen the working parts from the inside, use a semicircular file to process the lower edge.

5) Drill a hole for a self-tapping screw and sand the product with sandpaper.
6) Set the tiller body on a handle made of wood and tighten the fixing screw.
If desired, the metal part is primed and painted, and the wooden handle is varnished. Use of a manual uprooter. A homemade device allows you to remove weeds without destroying nearby earth layers and leaving the root systems of the plants grown intact. To remove weed grass, the sticking machine is stuck with a hand near the root and loosens the soil around the weed, turning the tool slightly from "yourself" and to "yourself."